BSL Q-Stage standards are used for support purpose and are made of standard scaffold tube of 48.3mm 0.D. x 4.00mm thick. They are also available in 48.3 x 3.25mm thick tubes in both 50C & 40C steel grades as per B.S. 4360. They have a series of pressed 'V' welded at 495mm interval. The standard has integral spigot (box wedge / Round) for accurate vertical alignment
SIZE (OPEN ENDED)
3M (9 ft 9 ins)
2M (6 ft 6 ins)
1.5M (4 ft 10.5 ins)
1M (3 ft 3 ins)
WEDGE SPIGOTTED
3M (9 ft 9 ins)
2M (6 ft 6 ins)
1.5M (4 ft 10.5 ins)
1M (3 ft 3 ins)
ROUND SPIGOTTED
3M (9 ft 9 ins)
2M (6 ft 6 ins)
1.5M (4 ft 10.5 ins)
1M (3 ft 3 ins)
: WEGHTS (KG)
: 15
: 9.9
: 7.6
: 5
: 15.6
: 10.5
: 8.2
: 5.6
LEDGERS / HORIZONTALS
CODE
: BSL - 02002
BSL ledgers are made from scaffold tube with wedge fixing device at each ends, which fix in pressed 'V' welded on the standards. They lie in uprights longitudinally. On the inside of the scaffold they are used at platform level and on the outside as a guardrail.
SIZE
2.4M (8 ft 0 ins)
1.8M (6 ft 6 ins)
1.2M (4 ft 2 ins)
WEGHTS (KG)
: 8.6
: 6.6
: 4.4
TRANSOM
CODE
: BSL - 02003
An inverted T-Section with wedge fixing device at each end. These are engaged with 'V' pressings on standards for fixing inner and outer standards traversely. The transom is also a seating for steelstage or wooden battens.
SIZE
1.8M (6 ft 0 ins)
1.2M (4 ft 2 ins)
0.8M (2 ft 8 ins)
0.7M (2 ft 6 ins)
: WEGHTS (KG)
: 15.5
: 8.4
: 5.6
: 5.4
RETURN TRANSOM
CODE
: BSL - 02004
Manufactured from a steel pressing, shaped so that it can be placed over a Ledger to form a 90กใ return in the scaffold. The Return Transom has a seating on one side for Steelstage or Timber battens.
SIZE
1.2M (4 ft 2 ins)
: WEGHTS (KG)
: 10.5
ONE BOARD STAGE BRACKET
CODE
: BSL - 02005
One Board Stage Bracket enable an additional 225mm platform to be provided on the inside of the scaffold. They do not require Tie Bars to connect them together. They are available with rolled T-Section or back to back welded angles.
SIZE
ONE BOARD
: WEGHTS (KG)
: 2.4
TWO BOARD AND THREE BOARD STAGE BRACKET
CODE
: BSL - 02006
Two and Three Board Stage Brackets provides a 457 mm (1.6") and 686mm (2.3") platform respectively to be provided on the inside of the scaffold nearest the building. Tie Bars must be used to connect the brackets together. They are available in both rolled sections and back to back angles welded together.
SIZE
TWO BOARD
THREE BOARD
: WEGHTS (KG)
: 5.4
: 9.4
TIE BAR
CODE
: BSL - 02007
BSL Tie Bar is a length of 38mm x 38mm angle iron with a dowel at both ends. Used to connect stage brackets together and ensure correct spacing for battens.
SIZE
2.4M (8 ft 0ins)
1.8M (6 ft 0ins)
1.2M (4 ft 2ins)
: WEGHTS (KG)
: 6
: 4.4
: 3.3
DIAGONAL BRACE
BSL diagonal brace are made from 48.3mm O.D. flattened at ends to receive a pivotted captive wedge fittings. These are engaged with 'V' pressings welded on the standards.